PRODUCT CATALOGUE
INDUSTRIAL MAINTENANCE
AGRICULTURA | FORESTAL | JARDINERÍA
Electric motors
Couplings
Speed multipliers, motor variators...
OLIPES PRODUCTS
Screw valves
AUXILIARY PRODUCTS
Open gears, pinions, racks
Chains
Bearings, pulleys
Linear slides
Rolling contact guides (ball screws)
Steel wire ropes
Plain bearings, high-speed headstocks
Splined shafts, cardan...
Mantenimiento
PRODUCTOS OLIPES
Refrigerantes Anticongelantes
UTILITIES, VIDEOS AND DOWNLOADS
SELECTOR DE LUBRICANTES
Speed multipliers, motor variators, gear motors gearboxes, sealed housing gears.
OLIPES OUR QUALITY PROMISE
OLIPES PRODUCTS FOR THE CARE OF INDUSTRIAL MACHINERY
Splined shafts, cardan and constant velocity joints, joints, bolts, bushings, ball joints
Olipes, S.L.
Follow us:
c/ Aluminio, 2-3 Polígono Empresarial Borondo 28510 Campo Real (Madrid)
Calls from Spain: 91 876 52 44 Calls from outside Spain: +34 91 876 56 03 Distributor: clientes@olipes.com Technical consultations: olipesresponde@olipes.com
Contact Form
Contact us
OLIPES
OUR QUALITY PROMISE
At Olipes, we are committed to researching and developing new more advanced, efficient and greener products. Products of the highest quality adapted to the needs of each vehicle, machine and equipment in order to prolong the life of engines, transmissions, gearboxes, clutches, filters... A comprehensive range of products and services for professionals with maximum innovation and efficiency, with cutting edge technology and top-quality raw materials.
At Olipes, we guarantee total quality in 100 % of our products.
SERVICE
In-person, telephone and 24/7 online technical and after-sales support.
Sample analysis service. Advice and follow-up of proactive maintennce plans.
Accredited by ENAC in accordance with the ISO 9001 quality and ISO 14001 environmental standards.
SOME GREAT REASONS FOR CHOOSING OLIPES
KNOWLEDGE
API Certificate accredited by EOLCS (Engine Oil Licensing and Certification System).
NSF International certification.
Certified by Chamber Trust.
INTA certification.
Certificates of biodegradability.
Good environmental practices.
OEMs Approvals.
Over 25 years of experience in manufacturing and distributing lubricants. Over 50 professionals, experts in lubrication. A portfolio with over 4,700 formulations with exclusive technology. Active in 75 industrial sectors.
LOGISTICS CAPACITY
Great responsiveness. What you need, when and where you need it in record time. 50,000 m³ destined to packaged raw materials. 13,000 m² of industrial facilities. 18,000 m³ of robotic logistics warehouse.
TECHNICAL GUARANTEE
Continuous optimisation of formulations. Own laboratory. .We are committed to researching and developing new more advanced, efficient and greener products. Tested at international laboratories and at our own laboratory. Selection of raw materials from top level suppliers.
Integrated quality and environment system
In all our processes and in all stages of the product until it reaches the market:
Product design Receipt of raw materials Manufacturing Packaging Transport
National and international quality and environmental certifications
Total quality guarantee in 100 % of our products.
CERTIFIED COMPANY
APPROVALS FROM MANUFACTURERS
We are engineers, we are researchers With us, you will always have a committed, flexible, motivated, constantly trained and highly qualified team to be at your service and at the service of your customers permanently.
Comprehensive advice on the use of lubricants Closeness, commitment and constant support, we seek to have a professional relationship with technological partners.
A highly qualified team that offers the highest quality, with state-of-the-art products and services.
Our goal is to provide you with constant support in your professional work, we want solid long-term relationships based on trust.
YOUR TRUSTED PARTNER
OLIPES puts at your disposal all the necessary lubricants for the care of your machinery. Our products guarantee maximum reliability in the most severe conditions. Our Technical Assistance Service (SAT) will advise you at all times, on the correct choice of the most suitable lubricant for your vehicle or machinery. With OLIPES lubricants, your engines and equipment will work with the greatest efficiency and maximum performance, maintaining the manufacturer’s warranty (OEM).
Specific lubricants for each component of your vehicle, your guarantee of reliability and good performance.
We manufacture products that fully exploit the advantages provided to us by technology: more advanced, greener, more efficient.
Technology
We are committed to top quality raw materials and national and international leading brand technology partners for each and every one of our products.
Reliability
We research at our own laboratory to obtain products with the maximum quality guarantee and the highest performance, tested under harsh and intense working conditions.
Quality
ACEITES DE MOTOR
AVEROIL MAXICER
MULTIFUNCIONALES
MAXIFLUID MAXITRACTOR
CONOZCA MÁS
ANTICONGELANTES Y REFRIGERANTES
ORGÁNICOS MINERALES
HIDRAÚLICOS
MAXIFLUID
FLUIDOS DE TRANSMISIONES
MAXIFLUID MAXIGEAR
GRASAS
MAXIGRAS
ADITIVOS DE COMBUSTIBLE
ONE SHOT
GRUPOS Y DIFERENCIALES
MAXIGEAR
ELECTRIC MOTORS
MAXIFLUID VG VISCOSITIES iso 2 a iso 10
Range of high fluidity and low viscosity lubricating oils of superior quality, with anti-wear (AW) additives, specially formulated to work in very high speed and high precision systems.
PACKAGING: 20 L
More information
SPECIFICATIONS: AFNOR NF E 48-603 HM DIN 51524 Parte 2 HLP ISO 6743/4 HM, 11158 (HM)
MAXIFLUID HLP VISCOSITIES iso 32* a iso 68
Range of high quality mineral anti-wear (AW) hydraulic oils, formulated with highly refined paraffinic bases and latest generation additives.
SPECIFICATIONS: AFNOR NF E 48-603 HM DENISON HF-0, HF-1, HF-2 DIN 51524/2 HLP ISO 6743/4 (HM), ISO 11158 (HM) SEB 181222
PACKAGING: 5, 20 , 200 and 1.000 L
MAXIGRAS COMPLEX Li-EP/2
Lithium complex extreme pressure grease with high-speed factor, especially for the lubrication of engines and large engines of medium and high revolutions.It reduces vibrations and guarantees perfect lubrication without the risk of contaminating the inductor circuit or the armature, thanks to its corrosion passivating additives.
SPECIFICATIONS: NLGI 2/3 DIN 51502 KP2-30 / KP3P-30 ISO 6743/9 L-XCEHB-2/3
PACKAGING: 400 g, 1 kg, 5, 20, 50 and 200 L
MAXIGRAS COMPLEX SP 46
Synthetic lithium complex grease with EP additives, designed for high-speed bearings. It provides easy start-up at low temperatures, excellent thermal stability, and oxidation resistance, extending re-greasing intervals or suitable for lifetime lubrication.
SPECIFICATIONS: Clasificación NLGI 2 DIN 51502 KPHC2K-50 ISO 6743/9 L-XECEB-2
PACKAGING: 5, 20 and 50 L
MAXIGRAS PU 2085 SHC/2.5
Synthetic, long-life polyurea grease for high-temperature, high-speed bearings. Ideal for noise-free applications and lifetime lubrication of sealed bearings due to its antioxidant properties. Do not mix with other greases. For assistance, contact Olipes SAT.
SPECIFICATIONS: AClasificación NLGI 2/3 DIN 51502 KPHC2-30 / KPHC3P-30 ISO 6743/9 L-XCFHB-2/3
PACKAGING: 400 g, 5, 20, 50 and 200 L
MAXIGRAS C45 Li-EP/2
Multifuntional lithium grease with EP additives, suitable for motor bearings operating under standard conditions, without risk of contaminating the inductor circuit or the armature, thanks to its corrosion passivating additives.
LUBRICATING WITH GREASES MOTORS IN GENERAL MULTIFUNTIONAL GREASE FOR STANDARD OPERATING CONDITIONS
SPECIFICATIONS: Clasificación NLGI 2* DIN 51502 KP2K-30 ISO 6743/9 L-XCCEB-2 * Available in the following consistencies NLGI 2 and 3
Lubricant selector
LUBRICATING WITH OIL FORCED CIRCULATION MOTOR BUSHINGS SUITABLE FOR EXTREME HIGH SPEEDS
LUBRICATING WITH OIL FORCED CIRCULATION MOTOR BUSHINGS MULTIFUNCIONAL FLUID
LUBRICATING WITH GREASES HIGH TORQUE AND/OR HIGH-POWERED MOTORS LONG-LIFE MULTIFUNCIONAL
OIL AND GREASE LUBRICATION
*ISO 22 available on demand
LUBRICATING WITH GREASES HIGH TORQUE AND/OR HIGH-POWERED MOTORS LONG-LIFE AND LOW NOISE PROPERTIES
Working temperature from -30 °C to +160 °C Speed factor: 350.000 mm/min.
Working temperature from -30 °C to +160 °C Speed factor: 400.000 mm/min.
LUBRICATING WITH GREASES LOW TORQUE ENGINES LONG-LIFE GREASE FOR HIGH SPEEDS AND LOW TORQUE
Working temperature from -50 °C to +120 ºC (peaks up to +140 °C) Speed factor: 1.000.000 mm/min.
Working temperature from -30 ºC to +120 ºC Speed factor: 350.000 mm/min.
Contact form
ASSISTANCE | PURCHASE OF PRODUCTS | PARTNER PROGRAMME | OTHERS
DO YOU WANT TO RECEIVE MORE INFORMATION?
COUPLINGS
Multifuntional lithium grease with EP additives, suitable for couplings operating under standard temperature and load conditions.
SPECIFICATIONS: NLGI classification 2* DIN 51502 KP2K-30 ISO 6743/9 L-XCCEB-2 * Available in the following consistencies NLGI 00/000, 0, 1, 2 and 3
MAXIGRAS 102/1
Calcium sulfonate complex grease with EP additives, formulated with high-viscosity semi-synthetic oils. This long-life product is especially recommended for couplings subjected to extreme loads and vibrations, even in aggressive, humid, saline environments, and under extreme temperatures.
SPECIFICATIONS: AGMA CG-1 Type, CG-2 Type NLGI classification 1* DIN 51502 KP1R-20 ISO 6743/9 L-XBFIB-1 Oil viscosity (cSt to 40 ºC) > 500 * Available in the following consistencies NLGI 0, 1, and 2
PACKAGING: 5, 20, 50 and 200 L
MAXIGRAS COMPLEX M
Black lithium complex grease with EP additives, solid lubricants, and high-viscosity oil. Specially recommended for couplings under extreme loads, vibrations, moisture, and extreme temperatures. Ideal for preventing corrosion caused by vibration.
SPECIFICATIONS: AGMA CG-1 Type, CG-2 Type NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity (cSt to 40 ºC) > 320
MAXIGRAS 49 WR
Black pseudoplastic semi-fluid lubricant of Calcium Sulphonate Complex, extreme pressure, high purity graphite content and high viscosity oil. High adhesion, especially for cambered tooth couplings under extreme loads and vibrations where greases with solid lubricants, high grip and resistance to centrifugation are required. Prevents contact corrosion. Grease recommended for Browning, Falk, Fast, Koppers, Regal Beloit, etc.
SPECIFICATIONS: AGMA CG-1 Type, CG-2 Type and CG-3 Type ISO 6743/9 L-XBDIB-1 NLGI classification 1 Oil viscosity (cSt to 40 ºC) >680 DIN 51502 OGPF1N-20
MAXIGRAS 94 OGL
Fluid black aluminium complex extreme pressure grease, with a very high content of high purity graphite and very high viscosity oil, especially for use in convex tooth couplings under loads and vibrations where greases with solid lubricants, high grip and resistance to centrifugation are required. Prevents contact corrosion.
SPECIFICATIONS: AGMA CG-1 Type, CG-2 Type and CG-3 Type* NLGI classification 0/00 DIN 51502 OGPF0/00G-20
PACKAGING: Spray 520 (400 ml ℮) 5 and 20 L
Calcium Sulphonate Complex extreme pressure grease formulated with high viscosity semi-synthetic oils. Long-lasting and highly adhesive, it is especially recommended for curved tooth couplings under extreme loads and vibrations, even under aggressive environments and extreme temperatures. Grease recommended by Browning, Falk, Fast, Koppers, Regal Beloit, etc.
LUBRICATING WITH GREASES CROWNED TOOTH AND CHAIN COUPLINGS EXTREME CONDITIONS HARSH ENVIRONMENTS
SPECIFICATIONS: AGMA CG-1 Type, CG-2 Type ISO 6743/9 L-XCFIB-1 NLGI classification 1* Oil viscosity (cSt to 40 ºC) > 500 DIN 51502 KP1R-30
LUBRICATING WITH GREASES GRID-BARREL COUPLINGS STANDARD CONDITIONS
LUBRICATING WITH GREASES GRID-BARREL COUPLINGS EXTREME CONDITIONS INCLUDING HARSH ENVIRONMENTS
LUBRICATING WITH GREASES GRID-BARREL COUPLINGS HIGH LOADS AND VIBRATIONS
Working temperature from -20 °C to +180 °C
LUBRICATING WITH GREASES CROWNED TOOTH AND CHAIN COUPLINGS EXTREME LOADS AND LOW SPEEDS
Working temperature from -20 °C to +160 °C
Working temperature from -20 ºC to +120 ºC (peaks up to +140 ºC) * NLGI grade according to Type CG-1/CG-2
LUBRICATING WITH GREASES CROWNED TOOTH AND CHAIN COUPLINGS EXTREME LOADS AND MEDIUM-HIGH SPEEDS
Working temperature from -20 ºC to +150 ºC
* Available in the following consistencies NLGI 0, 1, 1.5 and 2 Working temperature from -20 °C to +180 °C
Working temperature from -30 ºC to +120 ºC
SPEED MULTIPLIERS MOTOR VARIATORS GEAR MOTORS GEARBOXES SEALED HOUSING GEARS
Black fluid aluminium complex extreme pressure black grease, with a very high content of high purity graphite and very high viscosity oil, especially for extremely loaded bronze- free gearboxes and geared motors with severe wear and/or pitting problems, as well as in gearbox bearings.
PACKAGING: spray 520 (400 ml ℮) 5 and 20 L
SPECIFICATIONS: NLGI classification 0/00 DIN 51502 OGPF0/00G-20 Oil viscosity (cSt to 40 ºC) >1.500
MAXIGRAS C45 Li EP 00/000
Fluid lithium extreme pressure grease recommended for small gearboxes and geared motors requiring fluid greases under standard operating temperature conditions.
SPECIFICATIONS: NLGI classification 00/000* DIN 51502 OGPF00/000G-30 ISO 6743/9 L-XCBEB-00, L-XCBEB-000 * Available in the following consistencies NLGI 00/000, 0, 1, 2 and 3
MAXIGRAS 47 PLUS
Synthetic fluid lithium extreme pressure grease especially for all types of small gearboxes and geared motors operating at high temperatures and those with the possibility of lifetime greasing.
SPECIFICATIONS: NLGI classification 0/00 DIN 51502 GPHC0/002K-30 ISO 6743/9 ISO-L-XCCHB-0/00
MAXIGRAS 591
Semi-synthetic pseudoplastic gel with a filmy appearance, made from components suitable for use in the food industry and NSF H1 approved, which maintains its structure at room temperature and fluidises when subjected to shear stress in the gearbox. Recommended for all types of small to medium sized gearboxes and geared motors at linear speeds below 1.6m/s, especially those with sealing or housing leakage problems with conventional oils.
SPECIFICATIONS: SPECIFICATIONS: API GL-4 DIN 51571 Part 3 CLP US STEEL 224 Brookfield viscosity at 25 ºC > 7.000 cPs APPROVALS: Approved by NSF H1 and HALAL
PACKAGING: 20 and 200 L
MAXIGRAS 91
Semi-synthetic pseudoplastic gel with a filmy appearance that maintains its structure at room temperature and fluidises when subjected to shear stress in the gearbox. Recommended for all types of small to medium sized gearboxes and geared motors at linear speeds below 1.6m/s, especially those with sealing or housing leakage problems with conventional oils.
SPECIFICATIONS: AGMA 9005/D94 API GL-4 DIN 51571 Part 3 CLP US STEEL 224 Brookfield viscosity at 25 ºC > 7.000 cPs
PACKAGING: 50 and 200 L
MAXIGear atox
Range of 100 % synthetic oils of different viscosity grades formulated with food grade PAO base oils and suitable for all types of gearboxes, chains and aerial conveyors. Compatible with mineral, HC and synthetic PAO base oils.
LUBRICATING WITH OIL VISCOSITIES ISO 100 TO 460 LOW TEMPERATURES HIGH LOADS FOOD GRADE
SPECIFICATIONS: AGMA 9005-D94EP DIN 51517 Part 3 CLP ISO 12925-1 and 6743/6 CKC, CKD, CKS APPROVALS: Approved by NSF H1 and HALAL
PRESENTACIÓN: 20 y 200 L
MAXIGEAR SYN
Range of 100 % synthetic oils of different viscosity grades formulated with PAO base and synthetic esters, specially designed to withstand extreme load and temperature situations. Its advanced formulation provides an extraordinary chemical resistance to oxidation even with temperature peaks of more than 140 ºC, providing high drainage periods and a high reduction of costs due to maintenance stoppages. Recommended for gear systems, gearboxes, plain bearings, guides and bearings where a lubricant with EP properties and excellent cold flow properties is required. Excellent protection against heavy shock and/or sliding loads.
LUBRICATING WITH OIL VISCOSITIES ISO 100 TO 460 EXTREME TEMPERATURES AND LOADS
SPECIFICATIONS: AGMA 9005-D94 EP DAVID BROWN S1.53.101 DIN 51517 Part 3 CLP FIVES CINCINNATI (depending on viscosity) ISO 12925-1 and 6743/6: CKC, CKD, CK US STEEL 224
FLOW P.O.
Range of oils of different viscosity grades formulated with highly refined mineral bases and latest generation ash-free additives. Their advanced formulation provides an extraordinary capacity to withstand heavy loads (EP properties). Recommended for gear systems, gearboxes, plain bearings, guides and bearings where a lubricant with EP properties. Excellent protection against heavy shock and/or sliding loads.
LUBRICATING WITH OIL VISCOSITIES ISO 100 TO 680 STANDARD TEMPERATURES AND HIGH LOADS
SPECIFICATIONS: AGMA 9005-D94 EP DAVID BROWN S1.53.101-E DIN 51517 Part 3 CLP FIVES CINCINNATI (depending on viscosity) ISO 12925-1 and 6743/6 CKC, CKD US STEEL 224
PACKAGING: 20, 200 and 1000 L
LUBRICATING WITH GREASES EXTREME CONDITIONS
LUBRICATING WITH GREASES STANDARD CONDITIONS
LUBRICATING WITH GREASES LIFELONG LUBRICATION
Working temperature from -30 °C to +100 °C (peaks up to +120 ºC)
LUBRICATING WITH GREASES LONG-LIFE HEAVY-LOAD HIGH TEMPERATURE
Working temperature from -30 °C to +120 °C (peaks up to +135 ºC)
Working temperature from -15 ºC to +120 ºC
LUBRICATING WITH GREASES LONG-LIFE FOOD-GRADE LUBRICATION
Viscosidades ISO 100 a 460
Working temperature from -20 ºC to +120 ºC (peaks up to +140 ºC)
MAXIGEAR BBO
Range of biodegradable lubricating oils of different viscosity grades formulated on a 100 % synthetic ester base for the lubrication of industrial gears subjected to high pressures and high torques, gearboxes, multipliers, mechanical variators, worm gears, planetary gears, hypoid gears and chains. Also recommended as biodegradable circulation oils for gears and bearings. They have extreme pressure, anti-wear, anti-rust and anti-corrosion properties and are reinforced with greasing agents that significantly improve their lubricating properties compared to traditional lubricants. They are characterised by their high biodegradability (over 80 % in the CEC L-33-A-93 test)*, excellent thermal stability and service life, minimising downtime and maintenance costs(1).
LUBRICATING WITH OIL VISCOSITIES ISO 150 TO 320 EXTREME TEMPERATURES AND LOADS ENVIRONMENTALLY FRIENDLY
SPECIFICATIONS: DIN 51517 Part 3 CLP ISO 12925-1 CKC - CKD US STEEL 224
OLIOL
Range of 100 % synthetic high-performance oils based on 100 % synthetic polyglycols of different viscosity grades. These are high-performance synthetic oils based on polyglycols, for lubrication of compressors, bearings and gears, with very high resistance to seizure and anti-wear protection. OLIOL oils have a high natural viscosity index (V.I.), low coefficient of friction, high load carrying characteristics, low freeze points, high thermal and oxidation stability, low or no carbonaceous residue formation, compatibility with most elastomeric sealants(2), good thermal conductivity (allowing easy heat dissipation) and good shear stability. Recommended for applications in extreme conditions and operating temperatures from -35°C to +200 °C and in all machinery where a synthetic gear oil is recommended for continuous operation above +150 °C.
LUBRICATING WITH OIL VISCOSITIES ISO 68 TO 680 SEVERE TEMPERATURES AND LOADS
SPECIFICATIONS: AGMA: 9005-D94EP DAVID BROWN S1.53.106 DIN 51517 Part 3 CLP FIVES CINCINNATI (depending on viscosity) ISO 12925-1 and 6743/6 CKC, CKD, CKS US STEEL 224
(1) MAXIGEAR BBO oils are miscible with others used for the same purposes and with identical levels of quality. It is advisable to check the state of the other oil and the system in question prior to mixing. Check the joints and seals are suitable for this type of lubricant (NBR nitrile rubber, Chloroprene, Viton® FPM fluoro rubber, EPDM butyl rubber. (2) OLIOL: Depending on the weather and the temperature, polyglycol synthetic based oils may attack elastomers. At constant temperatures of up to100 ºC NBR-type rubber joints (acrylonitrile- butadiene rubber) may be used, or even SBR. For higher temperatures we recommend the use of FKM-based watertight materials (fluoro rubber), VMQ (vinyl methyl silicone), SBM and SILICONE (which withstand peaks of up to 250 ºC), among others. VITON (black fluoroelastomer which withstands temperature peaks of up to 300 ºC) joints are recommended in the event of the considerable loss of lubricant due to misalignments, as the use of this type of oil as a lubricant may result in the volume of these joints increasing by up to 7.95 %, thereby reducing such lubricant loss (test method for the determination of the % change in volume based on ASTM D-471 for 166 hours at 70 ºC, ± 2 ºC). We recommended the use of epoxy resin coatings or epoxy phenolic paint on parts which come into contact with the lubricant, given the natural tendency of polyglycols to soften and sometimes strip paints and coatings. The level windows should be made of natural glass or polyamide- based materials, as other transparent plastic materials such as plexiglass might crack. Not compatible with mineral oils.
OPEN GEARS PINIONS RACKS
Fluid black Aluminium Complex extreme pressure grease, with a very high content of high purity graphite and very high viscosity oil, especially for manual or automatic lubrication in all types of open gears where fluid greases are required.
SPECIFICATIONS: NLGI classification 0/00* DIN 51502 OGPF0/00G-20 Oil viscosity (cSt to 40ºC) >1.500 * Available in spray
Black Lithium Complex extreme pressure grease with solid lubricants and high viscosity oil, especially recommended for pinion-crown drives operating under extreme loads and vibrations, presence of humidity and extreme temperatures, where greases with extreme pressure solid lubricants are required. For manual use and in centralized systems allowing the use of consistent greases, with solid lubricants.
SPECIFICATIONS: NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity (cSt to 40 ºC) > 320
Black pseudoplastic semi-fluid lubricant of Calcium Sulphonate Complex, extreme pressure, high purity graphite content and high viscosity oil. High adhesion, especially for greasing pinion-crown gear drives working under extreme loads and vibrations, presence of humidity and extreme temperatures where greases with extreme pressure solid lubricants are required. For manual use, as well as in centralized systems that allow the use of greases that are consistent with solid lubricants.
SPECIFICATIONS: NLGI classification 1 DIN 51502 OGPF1N-20 ISO 6743/9 L-XBDIB-1 Viscosidad dinámica (cSt to 40 ºC)>680
MAXIGRAS 94 OGL/R
Black fluid adherent aluminium complex extreme pressure grease with a very high content of high purity graphite and molybdenum disulphide, manufactured with very high viscosity oil. Especially recommended for the ROLLING and RECOVERY phase of large pinion-crown gear drives acting by plastic deformation and without polishing effect. It can be applied in spraying and splash systems.
SPECIFICATIONS: NLGI classification 00 DIN 51502 OGPF00E-20 Oil viscosity (cSt to 40 ºC) > 1.000
PACKAGING: 200 L
MAXIGRAS 593
White Aluminium Complex extreme pressure white grease with PTFE type solid additives, NSF approved for use in the food industry, with special low friction characteristics on sliding surfaces, even in extreme working conditions and temperatures.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KPF2P-30 ISO 6743/9 L-XCEIB-2 APPROVALS: Approved by NSF H1 and HALAL
PACKAGING: spray 520 (400 ml ℮), 5, 20, 50 and 200 L
Adherent Aluminium Complex extreme pressure fluid black grease with a very high content of high purity graphite and very high viscosity oil, especially recommended for large open gears when a fluid grease is required for application by means of SPRAY or SPLASH systems or NORIA WHEEL. It exceeds the standards of manufacturers such as Polysius, FLSmidth, Humboldt, Talleres Iruña, etc., and/or spraying systems such as Lincoln Helios, De Limon, Woerner, Nortek, Neubor, etc.
LUBRICATING WITH GREASES DRIVES SUBJECTED TO HIGH LOADS SPRAYING, DRIPPING AND SPLASH LUBRICATION
SPECIFICATIONS: NLGI classification 0/00 DIN 51502 OGPF0/00G-20 Oil viscosity (cSt to 40 ºC) > 1.50
MAXIGRAS 94 OGL/F
Very fluid and adherent Complex Aluminium extreme pressure black grease with a very high content of high purity graphite and very high viscosity oil, especially recommended for large open gears using SPLASH - NORIA WHEEL systems where greater fluidity and grease return to the crankcase is required. Also suitable for SPRAY lubrication systems.
SPECIFICATIONS: Clasificación NLG 000 DIN 51502 OGPF000G-20 Oil viscosity (cSt to 40 ºC) > 1.500
MAXIGRAS 94 OGL/2500
Adherent Aluminium Complex extreme pressure fluid black grease with a very high content of high purity graphite and extremely high viscosity oil, especially recommended for large open gears when a fluid grease is required for application by SPRAY and/or SPLASH – NORIA WHEEL lubrication systems when the gear is damaged or vibrates excessively and a thicker lubricating grease is required.
SPECIFICATIONS: NLGI classification 0/00 DIN 51502 OGPF0/00G-20 Oil viscosity (cSt to 40 ºC) > 2.500
LUBRICATING WITH GREASES MECHANISMS WHICH ARE SMALL IN SIZE OR DIFFICULT TO REACH AEROSOL, MANUAL OR CENTRALIZED LUBRICATION
LUBRICATING WITH GREASES MECHANISMS WHICH ARE SMALL IN SIZE OR DIFFICULT TO REACH MANUAL OR CENTRALIZED LUBRICATION
Working temperature from -30 ºC to +160 ºC
LUBRICATING WITH GREASES NEW DRIVES IN THE RUNNING-IN PHASE SPRAYING, DRIPPING AND SPLASH LUBRICATION
Working temperature from -20 ºC to +120 ºC (peaks up to +140 ºC) Spraying temperature: -0 ºC maximum
CHAINS
Range of lubricating oils formulated with highly refined mineral bases and latest generation ash-free additives. Their advanced formulation provides an extraordinary capacity to withstand heavy loads (EP properties). Recommended for all types of drip, spray or splash lubricated chains under standard conditions.
SPECIFICATIONS: AGMA 9005-D94 EP DIN 51517 Part 3 CLP ISO 12925-1 and 6743/6 CKC, CKD
Range of biodegradable lubricating oils of different viscosity grades formulated in a 100 % synthetic ester base for chain lubrication. Also recommended as biodegradable circulation oils for gears and bearings. They have extreme pressure, anti-wear, anti-rust and anti-corrosion properties and are reinforced with greasing agents that significantly improve their lubricating properties compared to traditional lubricants.
SPECIFICATIONS: AGMA: 9005-D94E DIN 51517 Part 3 CLP ISO 12925-1 and 6743/6 CKC, CKD, CKS
acat se
Ester-based synthetic lubricating oils. Minimum residue formation. Recommended for all types of drip, spray or splash lubricated chains in a wide range of operating temperatures: from -40 ºC* to +250 ºC. Low volatility. ACAT SE chain oils offer high oxidation resistance and excellent protection against heavy shock and/or sliding loads, reducing chain elongation. Available in a wide range of viscosities. Compatible with mineral oils.
SPECIFICATIONS: AGMA 9005-D94EP DIN 51517/3-CLP ISO 3498-CKC
Adherent aluminium complex extreme pressure black fluid grease with a very high content of high purity graphite and very high viscosity oil, especially recommended for chains with wear problems and/or working at very high temperatures.
SPECIFICATIONS: NLGI classification 0/00* DIN 51502 OGPF0/00G-20 Oil viscosity (cSt to 40 ºC) > 1.500 * Available in spray
PACKAGING: spray 520 (400 ml ℮) 5 y 20 L
White Aluminium Complex extreme pressure white grease with PTFE type solid additives, NSF approved for use in the food industry, with special low friction characteristics on sliding surfaces, even in extreme working conditions and temperatures, as well as in all types of transport chains.
LUBRICATING WITH FLUID GREASES SMALL SIZE MECHANISMS EXTREME LOADS AND TEMPERATURE FOOD GRADE
SPECIFICATIONS: NLGI classification 2* DIN 51502 KPF2P-30 ISO 6743/9 L-XCEIB-2 * Available in spray APPROVALS: Approved by NSF: H1 and HALAL
MAXIGRAS cadenas
SPRAY grease with excellent lubricating power with EP and PTFE additives. Excellent penetration and adherence. Anti-wear and sealing effect properties. Withstands high dynamic and sliding loads.
LUBRICATING WITH FLUID GREASES MULTIFUNCTIONAL AEROSOL
PROPERTIES / APPLICATIONS: Eliminates annoying noises from car door hinges. Thoroughly lubricates the brake and clutch cable casings. Softens the functioning of the central locking. Lubricates motorcycle chains. Prolongs the useful life of lubricated elements.
PACKAGING: spray 520 (400 ml ℮)
viscoflow 300
Highly adherent SYNTHETIC lubricant (HONEY GREASE), especially recommended for graphic arts (MAN-ROLAND, HEILDELBERG, KBA, etc), the textile industry (dryer chains), the paper, timber and manufacturing industry, and applications which require chain lubricants with extremely high viscosity and very low evaporation. Recommended for the lubrication of heavily loaded low-speed chains.
LUBRICATING WITH FLUID GREASES EXTREME VISCOSITY APLICATIONS UNDER HIGH LOADS AND TEMPERATURES
SPECIFICATIONS: DIN 51517/3-CLP ISO 3498-CKC US STEEL 224 Viscosity 300 cSt to 100 ºC
PACKAGING: 1 and 5 L
LUBRICATING WITH OIL VISCOSITIES ISO 100 TO 680 STANDARD CONDITIONS
LUBRICATING WITH OIL VISCOSITIES ISO 150 TO 320 ENVIRONMENTALLY FRIENDLY
LUBRICATING WITH OIL EXTREME TEMPERATURES
* In accordance with degree of viscosity
LUBRICATING WITH FLUID GREASES SMALL SIZE MECHANISMS OR DIFFICULT TO REACH UNDER EXTREME PRESSURES AND LOADS
Working temperature from -20 ºC a +120 ºC (peaks up to +140 ºC)
Working temperature from -30 °C to +160 °C
Working temperature from -35 ºC to +150 ºC
Black pseudoplastic calcium sulphonate complex extreme pressure lubricant, with a high content of high purity graphite and very high viscosity oil. Maximum adhesion and protection of chains subjected to very high temperatures, vibrations, humidity and in harsh environments.
Working temperature from -20 ºC a +150 ºC
LUBRICATING WITH FLUID GREASES HIGH LOADS AND TEMPERATURES PSEUDOPLASTIC LUBRICANT
SPECIFICATIONS: NLGI classification 1 DIN 51502 OGPF1N-20 ISO 6743/9 L-XBDIB-1 Oil viscosity: (cSt to 40ºC) >680
SPLINED SHAFTS, CARDAN AND CV JOINTS, JOINTS, BOLTS, BUSHINGS, BALL JOINT.
Multifunctional anhydrous calcium grease for use on seals with high sealing, adhesion and resistance to moisture and water washout in standard temperature environments.
SPECIFICATIONS: NLGI classification 3* DIN 51502 M3G-20 / K3G-20 ISO 6743/9 L-XBBEA-3
maxigras C45 Li-EP/3
Multifunctional lithium extreme pressure grease, recommended for all types of CV joints, cardan joints, pins, etc. in high pressure working conditions and temperature standards.
SPECIFICATIONS: NLGI classification 3 * DIN 51502 KP3K-30 ISO 6743/9 L-XBCEB-3
PACKAGING:: 400 g, 1 kg, 5, 20, 50 y 200 L
maxigras 46/3
Black multifunctional lithium extreme pressure grease with solid lubricants and molybdenum disulphide, recommended for the lubrication of all types of CV joints, cardan joints, pins, etc. under high pressure and temperature standards.
ESPECIFICACIONES: NLGI classification 3* DIN 51502 KPF2K-20 ISO 6743/9 L-XBCEB-3
PACKAGING: 400 g, 5, 20, 50 y 200 L
Blue complex lithium extreme pressure grease for greasing all types of pins and bushings, as well as all types of transmissions and CV joints under heavy loads, vibrations and high temperatures.
ESPECIFICACIONES: NLGI classification 2/3 DIN 51502 KP2-30 / KP3P-30 ISO 6743/9 L-X-CEHB-2/3 NLGI GC-LB JOHN DEERE J13C/J25C
maxigras antiseize
Copper assembly paste with excellent adhesion and abrasion resistance. Recommended for use as an assembly lubricant for threaded joints and sliding surfaces of all types. Effectively combats wear of mating parts and seizure of metal surfaces, even at high temperatures and in corrosive media. Its extremely low coefficient of friction allows easy disassembly of lubricated parts.
ESPECIFICACIONES: NLGI classification 1/2 DIN 51818
PACKAGING: 1 kg
Black extreme pressure lithium complex grease with solid lubricants and high viscosity oil, especially for the lubrication of metal-to-metal contact surfaces under heavy shock loads, vibrations and limited sliding, even at very high temperatures as well as on all types of pins, transmissions and CV joints.
HIGH LOADS, VIBRATIONS AND HIGH TEMPERATURES
SPECIFICATIONS: NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity: (cSt to 40 ºC) >32
MAXIGRAS 102/2
Calcium Sulphonate Complex extreme pressure grease formulated with high viscosity semi-synthetic oils. Long life and high adhesion, it is preferred by transmission manufacturers in applications where maximum reliability is required, especially under extreme loads and vibrations, even under aggressive environments and extreme temperatures.
HIGH LOADS, VIBRATIONS AND TEMPERATURE IN HARSH ENVIRONMENTS
ESPECIFICACIONES: Clasificación NLGI 2 DIN 51502 KP2R-20 ISO 6743/9 L-XBFIB-2 viscosidad del aceite: (cSt a 40 ºC) >500
STANDARD CONDITIONS
HIGH LOADS
CARGAS MUY ELEVADAS
HARSH ENVIRONMENTS AND HIGH TEMPERATURES
Working temperature from -20 °C to +120 °C * Available in the following consistencies NLGI 2 and 3
Working temperature from -30 °C to +160 °C (peaks up to +180 ºC)
MAXIGRAS c42/3
MAXIGEAR BB
Working temperature from -20 °C to +100 °C * Available in the following consistencies NLGI 2 and 3
Working temperature from -30 ºC to +120ºC * Available in the following consistencies NLGI 2 and 3
Working temperature from -20 ºC to +1100 ºC* * Maximum working temperature in dry lubrication mode (solid additives).
x
BEARINGS PULLEYS
Multifunctional Lithium extreme pressure grease for the lubrication of all types of bearings and joints under high pressure conditions at normal temperatures and speeds. Recommended for manual greasing, as well as for automatic and single point lubrication installations recommending the use of consistent greases and available in softer consistencies for use in automatic systems requiring more fluid greases.
STANDARD CONDITIONS AND HIGH PRESSURE
SPECIFICATIONS: NLGI classification 2* DIN 51502 KP2K-30 (NLGI 2) ISO 6743/9 L-XCCEB-2 (NLGI 2) * Available in the following consistencies NLGI 00/000, 0, 1, 2 and 3
maxigras 46/2
Black multifunctional lithium extreme pressure grease with molybdenum disulphide for the greasing of all types of rolling and plain bearings operating under special conditions of high load and friction at standard temperatures and speeds. Recommended for manual greasing and in those automatic lubrication installations that allow the use of greases consistent with solid lubricants.
SPECIFICATIONS: NLGI classification 2* DIN 51502 KPF2K-20 ISO 6743/9 L-XBCEB-2 * Available in the following consistencies NLGI 2 and 3
Lithium blue complex extreme pressure grease for the greasing of all types of rolling and plain bearings operating under conditions of high loads, vibrations and high temperatures, even at medium-high speeds. Complies with NLGI GC-LB according to ASTM-D-4590 for automotive chassis and wheel hub lubrication. Recommended for manual greasing and in those automatic lubrication installations that allow the use of consistent greases. Recommended for manual greasing and in those automatic lubrication installations that allow the use of consistent greases.
SPECIFICATIONS: NLGI classification 2/3 DIN 51502 KP2-30 / KP3P-30 ISO 6743/9 L-X-CEHB-2/3 NLGI GC-LB
Working temperature from -30 ºC to +120 ºC (peaks up to +135 ºC)
STANDARD CONDITIONS AND HIGH LOADS
maxigras COMPLEX M
Black Lithium Complex extreme pressure grease with solid lubricants and high viscosity oil specially designed for the lubrication of bearings and joints operating under extreme loads and vibrations even at high temperatures and where the use of extreme pressure solid lubricants is required. Recommended for manual greasing and in those automatic lubrication installations that allow the use of greases consistent with solid lubricants.
EXTREME LOADS AND TEMPERATURES
Working temperature from -30 °C to +160 °C (peaks up to +135 ºC)
Calcium Sulphonate Complex extreme pressure grease formulated with high viscosity semi-synthetic oils, long life, especially recommended for the lubrication of bearings and joints working under extreme loads and vibrations, even at very high temperatures and in very aggressive environments. Recommended for manual greasing, as well as for automatic and single point lubrication installations recommending the use of consistent greases and available in softer consistencies (1 and 0) for use in automatic systems requiring more fluid greases.
Copper assembly paste with excellent adhesion and abrasion resistance. Recommended for use as an assembly lubricant for threaded joints and sliding surfaces of all types. For use in bearings subjected to high temperatures (>300 °C) where the use of conventional greases is not recommended. It is an essential requirement that the bearing works at very low speed (wheel bearings of trolley wheels in heat curing furnaces, paint booths, etc.). The greasing operation will be carried out by applying very small quantities of paste by brush, previously rolling the tracks and rolling elements with the same paste.
EXTREME TEMPERATURES AND LAMINAR LUBRICATION
Working temperature from -30 °C to +180 °C
SPECIFICATIONS: NLGI classification 1/2 DIN 51818
Más información
maxigras 542*
MULTIFUNCTIONAL FOOD GRADE
Working temperature from -20 to +100ºC (peaks up to +120ºC)
MAXIGRAS 592*
SPECIFICATIONS: NLGI classification 2 DIN 51502 KP2P-30 ISO 6743/9 L-XCEIB-2 APPROVALS: Approved by NSF: H1 and HALAL
PRESENTACIÓN: 5, 20, 50 y 200 L
maxigras 593*
White Aluminium Complex EP grease, with PTFE type solid additives, approved by NSF as H1 for use in the food industry. Grease with an excellent friction coefficient, for the lubrication of bearings of all types of mechanisms working in areas with risk of contamination of foodstuffs in the manufacturing process, even at high vibrations, pressures and very high temperatures.
VERY HIGH LOADS AND TEMPERATURES FOOD GRADE
MAXIGRAS 61
Extreme Pressure grease without dropping point and very high viscosity oil, especially suitable for greasing bearings and joints of slow-moving equipment operating continuously at temperatures between +120 ºC and +180 ºC.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KPF2R-10 ISO 6743/9 L-XAFEB-2
maxigras 63
EXTREME TEMPERATURES AND HIGH LOADS
Working temperature from -10 ºC to +180 ºC (peaks up to +200 ºC)* * Maximum recommended temperature in continuous operation: +160 ºC/+180 ºC with continuous lubrication. Avoid direct contact with flame or source of ignition.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KP2R-10 ISO 6743/9 L-XAFEB-2
STARTWIN 4T GARDEN 10W40
Startwin 4T Garden 10W40 es un aceite semisintético multigrado, para herramientas y maquinaria de jardín con motores de gasolina 4T refrigerados por aire.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KPFK2U-30 ISO 6743/9 L-XCGIB-2 NLGI GC-LB
PACKAGING: 1 L
maxigras FHT-2
PTFE and perfluorinated oil (PFPE) grease with no drop point and extreme pressure properties, designed for long-life lubrication of bearings and mechanisms operating at extreme temperatures. This grease excels in the most aggressive chemical environments (acids, alkalis, solvents, etc.) and significantly extends greasing intervals under challenging conditions.
SPECIFICATIONS: NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity: (cSt to 40ºC) >320
SPECIFICATIONS: NLGI classification 2* DIN 51502 KP2R-30 ISO 6743/9 L-XCFIB-2
maxigras 3000 BBO
Special grease made of anhydrous calcium and vegetable ester base oils, extreme pressure, biodegradable, specially formulated for the general lubrication of bearings and bushings and all types of mechanisms working in areas with risk of environmental contamination, aquifers, water treatment plants, floodgates, etc. and available in softer consistencies (1 and 0) for use in automatic systems that require more fluid greases.
SPECIFICATIONS: CNLGI classification:2* DIN 51502: KPE2G-20 ISO 6743/9: L-XBCEB-2 * Available in the following consistencies NLGI 0, 1 and 2
Multifunctional Anhydrous Calcium white grease approved by NSF as H1 for use in the food industry, specially formulated for the lubrication of bearings of all types of mechanisms working under standard conditions in areas with risk of contamination to foodstuffs in their manufacturing process.
SPECIFICATIONS: NLGI classification 2 DIN 51502 K2G-20 / M2G-20 ISO 6743/9 L-XBBIA-2 APPROVALS: Approved by NSF: H1 and HALAL
MULTIFUNCTIONAL white Aluminium Complex EP grease, approved by NSF as H1 for use in the food industry, specially formulated for the lubrication of bearings of all types of mechanisms working in areas with risk of contamination to food in their manufacturing process even at high vibrations, pressures and very high temperatures.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KPF2P-30 ISO 6743/9 L-XCEIB-2 APPROVALS: Approved by NSF: H1 and HALAL
maxigras COMPLEX SP 46
Synthetic long-life Complex Lithium extreme pressure grease, especially for bearings and joints of mechanisms working at extreme speeds. Especially for use in small motors requiring low starting torque and/or for mechanisms operating at very low temperatures. Allows for widely spaced relubrication operations, even for life in sealed bearings.
EXTREME SPEEDS LOW TEMPERATURES
Working temperature from -50 °C to +120 ºC (peaks up to +140 ºC) Speed factor: > 1.000.000 mm/min.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KPHC2K-50 ISO 6743/9 L-XECEB-2
Working temperature from -30 ºC to +250 ºC (peaks up to 280 ºC)
VERY HIGH LOADS, VIBRATIONS AND TEMPERATURES
Working temperature from -20 °C to +100 °C (peaks up to +120 ºC)
VERY HIGH LOADS ENVIRONMENTALLY FRIENDLY
Graphitized black grease with no drop point, extreme pressure properties, and very high-viscosity oil. Ideal for lubricating bearings and joints in slow-moving equipment that operates continuously at temperatures between +120 °C and +180 °C. Particularly suited for main gears, double drum winches in mining, agglomerate plants, lift pulleys, and similar applications.
EXTREME TEMPERATURES AND HIGH LOADS HARSH ENVIRONMENTS
LINEAR SLIDES
FLOW G
Range of lubricating oils formulated with highly refined mineral bases and anti-stick-slip additives. Their advanced formulation provides an extraordinary capacity to withstand heavy loads (EP properties), high resistance to water washout and fast demulsification to avoid tramp-oil effect in machinery and tools. Available in viscosities ISO 32 to ISO 1000. Excellent protection against heavy shock and/or sliding loads.
SPECIFICATIONS: AFNOR: NF E 48-603 HM / NF E 60 200 HG CINCINNATI MILACRON DIN 51524/2 HLP DIN 51517/3-CLP ISO 3498 HG/G
Adherent Aluminium Complex extreme pressure black fluid grease with very high content of high purity graphite and very high viscosity oil, especially recommended for guides under high loads, vibration and high temperatures.
White Aluminium Complex EP grease, with PTFE type solid additives, approved by SF as H1 for use in the food industry. With an excellent friction coefficient, it favours the sliding of the guides even at very high pressures, vibrations and high temperatures in areas where there is a risk of contamination of foodstuffs in the manufacturing process.
MAXIGRAS 46/2
Multifunctional lithium extreme pressure black grease with molybdenum disulphide for the greasing of all types of guides and slides operating under standard temperature conditions and greasing systems requiring the use of very low friction, consistent greases under high loads.
MAXIGRAS C45 Li-EP00/000
Extreme pressure lithium fluid grease, especially for the lubrication of all types of guides operating at standard temperature conditions with greasing systems that require the use of fluid greases. Available in harder consistencies for use in centralized systems requiring more consistent greases.
SPECIFICATIONS: NLGI classification 00/000* DIN 51502 OGPF00/000G-30 ISO 6743/9 L-XCBEB-00/000 * Available in the following consistencies NLGI 00/000, 0, 1, 2 and 3
Black Lithium Complex extreme pressure grease with solid lubricants and high viscosity oil specially designed for the lubrication of guides and metal-to-metal contact surfaces at very high temperatures requiring the use of consistent greases with very low friction and extreme loads.
LUBRICATING WITH GREASES EXTREME LOADS AND TEMPERATURES, CONSISTENT GREASE
SPECIFICATIONS: Working temperature from -20 °C to +160 °C NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity: (cSt to 40 ºC) >320
VISCOSITIES ISO 32 TO 68 A 680 MULTIFUNCTIONAL SLIDEWAY AND HYDRAULIC OILS STANDARD CONDITIONS
LUBRICATING WITH GREASES EXTREME LOADS AND PRESSURES AEROSOL, MANUAL OR CENTRILIZED LUBRICATION
LUBRICATING WITH GREASES SPRAY LUBRICATION FOOD GRADE
LUBRICATING WITH GREASES CENTRALIZED LUBRICATION STANDARD CONDITIONS
Working temperature from -30 °C to +100 °C (peaks up to +120 °C)
LUBRICATING WITH GREASES STANDARD CONDITIONS AND HIGH LOADS
Working temperature from -20 °C to +120 °C (peaks up to +140 °C)
Temperatura de trabajo desde -20 °C hasta +160 °C
ROLLING CONTACT GUIDES (BALL SCREWS)
SPECIFICATIONS: AGMA 9005-D94 EP DAVID BROWN S1.53.101 DIN 51517 Part 3 CLP FIVES CINCINNATI (depending on viscosity) ISO 12925-1 and 6743/6 CKC, CKD US STEEL 224
MAXIFLUID VG
SPECIFICATIONS: AFNOR NFE48-603 HM DIN 51524/2 HLP ISO 6743/4 HM, ISO 11158 HM
Lithium extreme pressure fluid grease for the lubrication of all types of guides and ball screws operating under standard temperature conditions and greasing systems requiring the use of fluid greases. Available in harder consistencies for use in centralized systems requiring more consistent greases.
MAXIGRAS 592
MULTIFUNCTIONAL white Aluminium Complex EP grease, approved by NSF as H1 for use in the food industry, specially formulated for general lubrication of guides and ball screws working in areas with risk of contamination to foodstuffs in their manufacturing process.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KP2N-30 ISO 6743/9 L-XCDIB-2 APPROVALS: Approved by NSF: H1 and HALAL
Synthetic long-life Lithium Complex extreme pressure synthetic grease, especially for the lubrication of precision ball screws and guides working at extreme speeds. Excellent starting torque and dosing properties for automatic lubrication systems using consistent greases.
Calcium Sulphonate Complex extreme pressure grease formulated with high viscosity semi-synthetic oils, especially recommended for the lubrication of guides and ball screws working in very high temperature conditions, as well as under extreme loads and vibrations and hasrsh environments. Available in softer consistencies for use in systems requiring more fluid greases.
LUBRICATING WITH GREASES HIGH TEMPERATURES, HIGH LOADS AND PRESENCE OF WATER AND/OR WATER STEAM
SPECIFICATIONS: NLGI classification 2* DIN 51502 KP2R-30 ISO 6743/9 L-XCFIB-2 Oil viscosity: (cSt to 40 ºC) >500 * Available in the following consistencies NLGI 0, 1 and 2
LUBRICATING WITH OIL VISCOSITIES ISO 2 TO ISO 10 HIGH SPEED
LUBRICATING WITH GREASES HIGH SPEEDS LOW TEMPERATURES LOW START-UP TORQUE
LUBRICATING WITH GREASES VERY HIGH LOADS AND TEMPERATURES FOOD GRADE
STEEL WIRE ROPES
Black pseudoplastic calcium sulphonate complex extreme pressure lubricant, with a high content of high purity graphite and very high viscosity oil. Maximum adhesion and corrosion protection for outdoor cables in harsh environments such as marine ports and mining.
SPECIFICATIONS: NLGI classification 1 DIN 51502 OGPF1N-20 ISO 6743/9 L-XBDIB-1 Oil viscosity: (cSt to 40 ºC) >680
Adherent Aluminium Complex extreme pressure black fluid grease with a very high content of high purity graphite and very high viscosity oil, especially recommended for the greasing and corrosion protection of outdoor cables in harsh environments such as in marine ports and mining.
SPECIFICATIONS: NLGI classification 0/00 DIN 51502 OGPF0/00G-20 Oil viscosity: (cSt to 40 ºC) >1.500 * Available in spray
White Aluminium Complex EP grease, with PTFE type solid additives, approved by NSF as H1 for use in the food industry. Thanks to the PTFE, it has an excellent friction coefficient that favours protection against corrosion and wear of bare wires in all types of aggressive conditions, especially in areas with risk of contamination of foodstuffs in the manufacturing process.
LUBRICATING WITH GREASES GEARS AND WIRE ROPES FOR CRANES AND LIFTS
LUBRICATING WITH GREASES SMALL OR DIFFICULT-TO-ACCESS UNDER HIGH LOADS LIFTING SYSTEMS
LUBRICATING WITH GREASES SMALL OR DIFFICULT-TO-ACCESS LIFTING SYSTEMS FOOD GRADE
LUBRICATING WITH GREASES SMALL OR DIFFICULT-TO-ACCESS LIFTING SYSTEMS MULTIFUNCTIONAL
PLAIN BEARINGS HIGH-SPEED HEADSTOCKS
Range of superior quality, high fluidity and low viscosity lubricating oils, manufactured with highly refined mineral bases with a high degree of cleanliness and latest generation anti-wear (AW) additives specially formulated to work in very high speed and high precision systems.
Synthetic long-life Complex Lithium extreme pressure synthetic grease with very low starting torque, recommended for the lubrication of precision bevel gears, precision bearings and generally for machining centre heads working at extreme speeds under conditions of high thermal stress.
ESPECIFICACIONES: Clasificación NLGI 2 DIN 51502 KPHC2K-50 ISO 6743/9 L-XECEB-2
LUBRICATING WITH OILS VISCOSITIES ISO 2 TO ISO 10 HIGH SPEED
SCREW VALVES
Multifunctional lithium extreme pressure black grease with molybdenum disulphide for the lubrication of valve spindles in standard temperature conditions and lubrication systems requiring the use of consistent, very low friction greases.
Complex Lithium extreme pressure black grease with solid lubricants and high viscosity oil specially designed for the lubrication of valve spindles in high temperature conditions and lubrication systems requiring the use of very low friction, consistent greases under high loads.
SPECIFICATIONS: NLGI classification 2/3 DIN 51502 KPF2-20 / KPF3P-20 ISO 6743/9 L-XBEHB-2/3 Oil viscosity: (cSt to 40 ºC) >320
Calcium Sulphonate Complex extreme pressure grease formulated with high viscosity semi-synthetic oils, especially recommended for the greasing of valve spindles under high temperature conditions and greasing systems that require the use of very low friction consistent greases under high loads. Especially for extremely humid and corrosive environments, preventing seizure over time.
SPECIFICATIONS: NLGI classification 2 DIN 51502 KP2R-30 ISO 6743/9 L-XCFIB-2 Oil viscosity: (cSt to 40 ºC) >320
MAXIGRAS antiseize
HIGH TEMPERATURES AND HIGH LOADS
HIGH TEMPERATURES, HIGH LOADS AND PRESENCE OF WATER AND/OR WATER STEAM
ANTI-SEIZE PASTE EXTREME TEMPERATURES HARSH ENVIRONMENTS
Auxiliary products
MULTIFLOW AFLOJATODO
SPRAYS
It is the most powerful multipurpose spray loosener on the market and the one preferred by professionals, with more than 2,000 applications and uses. Exceeds the corrosion protection requirements according to the INTA 150492 standard in sea fog and the INTA 150514A standard in the humidity chamber.
PROPERTIES / APPLICATIONS:
• Its penetrating power acts as a loosening device, unlocking seized metal parts, locks, hinges, etc. • Dissolves rust quickly and protects all types of metal parts and electrical equipment from corrosion. • Prevents the sulphation of battery terminals and low-voltage electrical connections, thanks to the water-repellent film that forms after application, its dielectric capacity and its protective action. • Unlocks locks and prevents freezing in winter.
MAXIGRAS CADENAS
Maxigras Cadenas is a Teflon grease (with PTFE) in a spray, light in colour, specially formulated for the lubrication of chains that are subject to great stresses and adverse weather conditions (water, snow, dust, mud, etc.).
• Eliminates annoying noises from car door hinges. • Thoroughly lubricates the brake and clutch cable casings. • Softens the functioning of the central locking. • Lubricates motorcycle chains. • Prolongs the useful life of lubricated elements.
ABSORBENTE ACEITE
HYGIENE
Industrial absorbent for chemical spills, manufactured from fully inert natural inorganic components, guaranteeing maximum safety in the chemical products disposal process.
• Effectively absorbs industrial oil spills, solvents, hydrocarbons, plant-based oils, grease stains, coolants and other chemicals. • Chemically inert, non-flammable, and harmless to people and animals, it is the ideal absorbent for workshops and transport fleets.
BOBINA CELULOSA MINI BLANCA
Pack of 6 double-layer white cellulose paper rolls. More than 120 metres of double-layer embossed paper, with pre-cut lines and 1 kilogram of weight per roll, for the most demanding when it comes to absorbing and drying oil, grease and general dirt stains at workshop, petrol stations, car washes, etc.
PACKAGING: 6 units
MAXICER PREMIUM 30/40
GARAGE
Mineral lubricating oil for reciprocating or piston air compressors, single-stage (2-3 bar) or multi-stage (up to 8 bar), air or water-cooled air compressors and vacuum pumps requiring a lubricant with SAE 30/40 or ISO 100 viscosity in Premium quality
SPECIFICATIONS:
Compressors DIN 51506: VCL and VDL ISO 6521-1: DAB and DAH; ISO 6743/3: DAB and DAH Hydraulic systems DIN 51524/2: HLP ISO 11158: HM; ISO 6743/4: HM
PACKAGING: 5 and 200 L
MAXICER PREMIUM 10/20
Mineral lubricating oil for rotary, screw (ISO 46), air-cooled or water-cooled air compressors, allowing oil change intervals from 2,000 to 4,000 hours, depending on the compressor model and operating conditions.
BOBINA CELULOSA INDUSTRIAL
Professional pack of 2 blue coloured industrial cellulose paper rolls. Its more than 300 metres of laminated soft (padded) paper, with pre-cut lines and over 3 kilograms of weight per roll, facilitate the work of cleaning and drying hands, parts and surfaces in the workshop and in the vehicle.
PACKAGING: 2 units
MASTERCLEAN DES
DEGREASERS
Universal degreasing liquid, used pure, for cleaning all types of mechanical components in parts washing machines in workshops, including aluminum cylinder heads, radiators, and starter motors.
• Formulated with carefully selected solvents. Free from halogenated solvents, polynuclear aromatic compounds and PCBs. • Compatible with most paints, plastics and rubber gaskets in industrial part washing machines for workshops. • Good evaporation rate, insoluble in water and a mild odour.
PACKAGING: 20 kg
CONTACT
Distributor service
Technical support
RELATED VIDEOS
Automatic gearboxes
Viscosity of lubricating oils
MTF-ATF gearbox lubrication types
Choosing the right oil when DPF gas exhaust filters are used
Hybrid vehicle maintenance
USEFUL DOCUMENTATION
PRODUCT CATALOGUES
CAMPAIGNS AND PROMOTION
TRAINING MATERIAL
CERTIFICATIONS
C/ Aluminio, 2-3, Polígono Empresarial Borondo 28510 Campo Real (Madrid)
Calls from Spain: 91 876 52 44 Calls from outside Spain: +34 91 876 56 03 Distributor: clientes@olipes.com Technical Consultations: olipesresponde@olipes.com
